![](/jspui/image/dspace_header.jpg)
Please use this identifier to cite or link to this item:
https://idr.l4.nitk.ac.in/jspui/handle/123456789/14757
Title: | Effect of surface treatment on wetting behavior of copper |
Authors: | Kalgudi S. Pavithra G.P. Prabhu K.N. Koppad P.G. Venkate Gowda C. Satyanarayan |
Issue Date: | 2019 |
Citation: | Materials Today: Proceedings , Vol. 35 , , p. 295 - 297 |
Abstract: | Super-hydrophobic surfaces are very useful in cleaning activities. Surfaces with water contact angles above 150° are regarded as superhydrophobic surfaces. In the present study an attempt has been made to achieve superhydrophobicity on copper substrate by electrochemical etching and electro-deposition of Co-Ni alloy and Co-Ni-Graphene composite. A contact angle of about 105° was obtained on Cu surface with electro-deposited Co-Ni alloy and on electro-deposited Co-Ni-G alloy contact angle was found to be 106°. The contact angle was significantly higher at about 142° with electro etched surface. Corrosion test was carried out with electrochemically etched Cu. Electrochemical etching time was varied from 30 to 240 min. The electro-etched Cu substrate etched for 60 min. showed better corrosion resistance with a corrosion rate of 0.197 mm/year. The surface topography of both etched and electrodeposited samples was studied by atomic force microscopy (AFM) and the results were correlated with the wettability data. © 2019 Elsevier Ltd. |
URI: | https://doi.org/10.1016/j.matpr.2020.01.379 http://idr.nitk.ac.in/jspui/handle/123456789/14757 |
Appears in Collections: | 2. Conference Papers |
Files in This Item:
There are no files associated with this item.
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.