Please use this identifier to cite or link to this item: https://idr.l4.nitk.ac.in/jspui/handle/123456789/11649
Title: Influence of equal channel angular pressing and laser shock peening on fatigue behaviour of AM80 alloy
Authors: Praveen, T.R.
Nayaka, H.S.
Swaroop, S.
Issue Date: 2019
Citation: Surface and Coatings Technology, 2019, Vol.369, , pp.221-227
Abstract: AM80 magnesium alloy was processed with Equal Channel Angular Press (ECAP)for grain refinement. Laser shock peening without coating (LSPwC)were executed on ECAP processed sample at 8 GW cm?2 and further grain refinement were observed at surface. SEM image expose the grain refinement at different stage of processing, and fine grains of sub-micron size were observed at surface level after ECAP + LSPwC. Residual stress were measured using X-ray diffraction, sin2(?)method and compressive residual stress was found after ECAP. LSPwC intensify the compressive residual stress at surface. Increases in magnitude of residual stresses were noticed with 200 and 300% of LSPwC. Increase in surface roughness were noticed from 0.6 to 6.8 ?m by increasing the percentage of LSPwC coverage. Fatigue tests were acknowledged the effect of ECAP and ECAP + LSPwC on reliability of grain refinement technique. ECAP sample showed fatigue life of 7539 cycles against as received. Highest fatigue life of 85,268 life cycles was observed with ECAP + LSPwC by 100% of coverage. Further process of LSPwC for 200 and 300%, fatigue life was significantly decreases to 22,987 and 384 cycles respectively. SEM images of fractured surface exhibits effect of ECAP and LSPwC on crack initiation and propagation for failure. 2019 Elsevier B.V.
URI: http://idr.nitk.ac.in/jspui/handle/123456789/11649
Appears in Collections:1. Journal Articles

Files in This Item:
There are no files associated with this item.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.