Aluminising of mild steel using Al-11Si-1.2Cu baths

Please use this identifier to cite or link to this item: https://idr.l4.nitk.ac.in/jspui/handle/123456789/9837

Full metadata record

DC Field	Value	Language
dc.contributor.author	Shashibhushan, Raju, M.
dc.contributor.author	Prashanth, H.
dc.contributor.author	Udaya, Bhat, K.
dc.date.accessioned	2020-03-31T06:51:33Z	-
dc.date.available	2020-03-31T06:51:33Z	-
dc.date.issued	2013
dc.identifier.citation	International Journal of Earth Sciences and Engineering, 2013, Vol.6, 4, pp.717-721	en_US
dc.identifier.uri	http://idr.nitk.ac.in/jspui/handle/123456789/9837	-
dc.description.abstract	Hot-dip aluminising of mild steel was done using Al-11Si-1.2Cu (at %) bath at 750 C for dipping time ranging from 300 to 3600 seconds. Aluminised layer was investigated using scanning electron microscope and energy dispersive spectroscopy. The intermetallic layer consisted of 4 distinct layers, namely, ?5-(Al7Fe2Si), ?-FeAl3, ?-Fe2Al5 and ?1-(Al,Si)5Fe3. Total intermetallic layer thickness was following parabolic growth kinetics with time. Total thickness was increasing predominantly due to increase in Fe2Al5 layer, which itself was following parabolic growth behaviour. Total intermetallic layer thickness was smaller compared to intermetallic layer thickness reported using pure aluminium or aluminium silicon baths. 2013 CAFET-INNOVA TECHNICAL SOCIETY.	en_US
dc.title	Aluminising of mild steel using Al-11Si-1.2Cu baths	en_US
dc.type	Article	en_US
Appears in Collections:	1. Journal Articles

Files in This Item:

There are no files associated with this item.