Please use this identifier to cite or link to this item: https://idr.l4.nitk.ac.in/jspui/handle/123456789/7998
Full metadata record
DC FieldValueLanguage
dc.contributor.authorVlgnesh, Nayak, U.
dc.contributor.authorNarayan, Prabhu, K.
dc.date.accessioned2020-03-30T10:03:18Z-
dc.date.available2020-03-30T10:03:18Z-
dc.date.issued2017
dc.identifier.citationASM International - 29th Heat Treating Society Conference, HEAT TREAT 2017, 2017, Vol.2017-October, , pp.394-402en_US
dc.identifier.urihttp://idr.nitk.ac.in/jspui/handle/123456789/7998-
dc.description.abstractThe cooling behavior of neem and mineral oil was obtained using instrumented ISO 9950 inconel probe. Flash, fire points and the viscosity of quenching media were measured. These oils were used to quench harden AISI 1045 and AISI 1090 grade steel probes of section diameters 25 and 50 mm. (The top and bottom faces of steel probes were coated with insulating paste to minimize end effects of heat transfer during quenching.) The measured temperature data in steel probes were used to estimate spatiotemporal heat flux by solving inverse heat conduction problem at the interface of the probe/quenching medium The estimated heat flux transients, microstructure, and hardness measurements were found to be similar for both oils indicating the potential application of neem oil as quenchant for heat treatment of steels. Copyright � 2017 ASM Internationale All rights reserved.en_US
dc.titleComparative study of the effect of section thickness of steel during quenching in neem and mineral oilen_US
dc.typeBook chapteren_US
Appears in Collections:2. Conference Papers

Files in This Item:
There are no files associated with this item.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.