Please use this identifier to cite or link to this item: https://idr.l4.nitk.ac.in/jspui/handle/123456789/6671
Full metadata record
DC FieldValueLanguage
dc.contributor.authorRao, C.M.
dc.contributor.authorRao, S.S.
dc.contributor.authorHerbert, M.A.
dc.date.accessioned2020-03-30T09:45:58Z-
dc.date.available2020-03-30T09:45:58Z-
dc.date.issued2019
dc.identifier.citationIOP Conference Series: Materials Science and Engineering, 2019, Vol.577, 1, pp.-en_US
dc.identifier.urihttp://idr.nitk.ac.in/jspui/handle/123456789/6671-
dc.description.abstractOptimization of process parameters in turning process is the fundamental machining operation which leads to better machining performance. This study has applied Technique for Order Performance by Similarity to Ideal Solution (TOPSIS) method to obtain the optimum process parameters in turning of Ti-6Al-4V alloy using Polycrystalline Diamond (PCD) cutting tool insert. The process parameters chosen for optimization were cutting velocity, feed rate and depth of cut. The objective is to minimize cutting temperature, tool wear, and surface roughness. TOPSIS is employed to analyze the input parameters on output performance characteristics. Nine experiments were conducted under MQL (Minimum Quantity Lubrication) environment based on an L9 orthogonal array, respectively. The optimization results indicate turning Ti-6Al-4V alloy at cutting velocity of 150 m/min, the feed rate of 0.5 mm/rev and depth of cut of 0.5 mm as optimum parameters obtained by TOPSIS technique. From the Analysis of variance (ANOVA), it was identified that depth of cut parameter is the most influencing process parameter on turning performance characteristics. � Published under licence by IOP Publishing Ltd.en_US
dc.titleStudies on the Effect of Process Parameters in Turning of Ti-6Al-4V Alloy Using Topsisen_US
dc.typeBook chapteren_US
Appears in Collections:2. Conference Papers

Files in This Item:
There are no files associated with this item.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.