Please use this identifier to cite or link to this item:
https://idr.l4.nitk.ac.in/jspui/handle/123456789/15211
Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Al-Shidaifat | |
dc.contributor.author | AlaaDdin; Kumar | |
dc.contributor.author | Sandeep; Chakrabartty | |
dc.contributor.author | Shubhro; Song | |
dc.contributor.author | Hanjung | |
dc.date.accessioned | 2021-05-05T10:26:46Z | - |
dc.date.available | 2021-05-05T10:26:46Z | - |
dc.date.issued | 2020 | |
dc.identifier.citation | APPLIED SCIENCES-BASEL , Vol. 10 , 18 , p. - | en_US |
dc.identifier.uri | https://doi.org/10.3390/app10186154 | |
dc.identifier.uri | http://idr.nitk.ac.in/jspui/handle/123456789/15211 | - |
dc.description.abstract | In this paper, a conceptual investigation of the interface between wireless power devices and a retina complementary metal oxide semiconductor (CMOS) neuron integrated circuit (IC) have been presented. The proposed investigation consists of three designs: design-I, design-II, and design-III. Design-I involves a slotted loop monopole antenna as per American National Standards Institute (ANSI) guidelines, which achieve an ultra-wide band ranging from 3.1 GHz to 10.6 GHz. The biocompatible antenna is made on silicon-nitride substrate using on-wafer packaging technology and it is used as a receiver device. The performance of antenna provides a wideband, sufficient power to receive, and low losses due to the avoidance of printed circuit board (PCB) fabrication. A CMOS based multi-stack power harvesting circuit achieves the output power ranging from 4 mW to 2.7 W and corresponds from the selected Radio Frequency (RF) bands of loop antenna is exhibited in design-II. The power efficiency of 40% to 82%, with respect to output powers of 4 mW to 2.7 W, is achieved. Design-III includes a CMOS based retina neuron circuit that employs a dynamic feedback technique and support to achieve the number of read-out spikes. At the end of the interface between wireless power devices and a CMOS retina neuron IC, 50 mV read-out spikes are achieved, with varying light intensity, from 0 mW/cm(2) to 2 mW/cm(2). The proposed design-II and design-III are implemented and fabricated using commercial CMOS 0.065 mu m, Samsung process. The antenna and RF power harvesting IC could be placed on a contact lens platform while retina neuron IC can be implanted after ganglions cells inside the eye. The antenna and harvesting IC are physically connected to the retina circuit in the form of light. This conceptual investigation could support medical professionals in achieving an interfacing approach to restore the image visualization. | en_US |
dc.title | A Conceptual Investigation at the Interface between Wireless Power Devices and CMOS Neuron IC for Retinal Image Acquisition | en_US |
dc.type | Article | en_US |
Appears in Collections: | 1. Journal Articles |
Files in This Item:
There are no files associated with this item.
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.