Please use this identifier to cite or link to this item: https://idr.l4.nitk.ac.in/jspui/handle/123456789/11324
Full metadata record
DC FieldValueLanguage
dc.contributor.authorMalagi, S.-
dc.contributor.authorAnawal, R.-
dc.contributor.authorGorabal, S.V.-
dc.contributor.authorDoddamani, M.-
dc.date.accessioned2020-03-31T08:31:07Z-
dc.date.available2020-03-31T08:31:07Z-
dc.date.issued2019-
dc.identifier.citationJournal of Mechanical Engineering Research and Developments, 2019, Vol.42, 5, pp.93-96en_US
dc.identifier.urihttps://idr.nitk.ac.in/jspui/handle/123456789/11324-
dc.description.abstractThe present study focuses on flexural and quasi-static compression behavior of high-density polyethylene (HDPE)/walnut shell (WS) composites. Flexural and quasi-static compression specimens by 20, 40 and 60 wt. % of WS are synthesized by polymer injection (PI) molding. The flexural modulus and strength are observed to increase with increase in the wt.% of WS. Compared to pure HDPE, the flexural modulus and strength increased in the range of 205-403% and 49-58% respectively. Further quasi-static compression tests are carried at 0.001, 0.01, 0.1 s-1 strain rates. Compressive modulus of HDPE/WS specimens is lower as compared to pure HDPE samples for all the strain rates. Compressive yield strength of HDPE/WS specimens shows increasing trend with increase in the strain rates. Scanning electron microscopy (SEM) is employed to study the fractography of the samples. 2019 Zibeline International Publishing Sdn. Bhd. All rights reserved.en_US
dc.titleFlexural and quasi-static compressive behavior of injection-molded walnut shell (WS)/HDPE compositesen_US
dc.typeArticleen_US
Appears in Collections:1. Journal Articles

Files in This Item:
File Description SizeFormat 
36 FLEXURAL AND QUASI-STATIC.pdf1.2 MBAdobe PDFThumbnail
View/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.