Please use this identifier to cite or link to this item: https://idr.l4.nitk.ac.in/jspui/handle/123456789/11271
Full metadata record
DC FieldValueLanguage
dc.contributor.authorValder, J.
dc.contributor.authorRijesh, M.
dc.contributor.authorSurendranathan, A.O.
dc.date.accessioned2020-03-31T08:31:01Z-
dc.date.available2020-03-31T08:31:01Z-
dc.date.issued2014
dc.identifier.citationJournal of Failure Analysis and Prevention, 2014, Vol.14, 5, pp.690-695en_US
dc.identifier.urihttp://idr.nitk.ac.in/jspui/handle/123456789/11271-
dc.description.abstractThe ECAP process is a promising technique for imparting large plastic deformation and breaking down the ingot cast structure without a resultant decrease in cross-sectional area. In the present study, the suitability of this technique for processing cast Al 5Zn 1Mg tubular specimens at room temperature has been investigated. Tubular specimens were extruded through an ECAP die with an angle of 150 between the two intersecting channels without a back pressure. Sand was used as a mandrel during pressing. The tubular specimens failed miserably in the first pass itself. A failure analysis was carried out using SEM, and cause for failure was determined. 2014, ASM International.en_US
dc.titleFailure Analysis of Cast Tubular Specimens of Al 5Zn 1Mg While Processing at Room Temperature by Equal Channel Angular Pressing (ECAP)en_US
dc.typeArticleen_US
Appears in Collections:1. Journal Articles

Files in This Item:
There are no files associated with this item.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.